Drill-Jet rioolboor
The ideal rig for sewer pipe drilling. Exactly round holes accurately positioned up to 350 mm diameter into sewer pipes is the specialty of this uniquely efficient machine.
The diamond core drilling system is designed for professional channel drilling up to 350 mm. This diamond channel core drilling system includes the CDM 23 WP core drilling machine with a 2.7 hp 2-stroke petrol engine, the CDR 350 channel core drill stand and a coordinated range of accessories. The 3-speed gearbox optimally exploits the engine torque and always drives the diamond core bit at the ideal speed when starting to suit the diameter of the cutting tool. Tool change is easy with the quick-release drill bit holder with integrated spindle protection.
This petrol driven sewer pipe drill rig makes a unique efficient core drilling system that optimally supports its user in every work situation. The drill stand is assembled using a tensioning ratchet when the sewer pipe is in an exposed position. If the sewer pipe is not completely accessible, the core drill rig is just as easily installed by anchoring it in the ground. The ergonomically placed hand crank wheel enables fatigue-free core drilling with both vertical and horizontal operation. The Teflon® coated support guide ensures lasting precision even under high loads with sliding sleeves and galvanized steel columns. The high stability of this innovative drill stand enables the precise angled drilling from 90 ° to 45 °. A useful detail is that crane eyelet, thanks to which the entire canal core drilling system can be lifted effortlessly and quickly into or out of the construction pit. The sewer pipe drill stand can, due to its universal mounting plate, be easily equipped with any electric drill motor. As tried-and-tested accessories a footboard unit, an excavator bucket frame and a water pressure tank are also available.
Drilling perfectly round holes for sewer pipes is the core competence of this extremely efficient and special machine. Explore all the features of the channel core drilling rig:
Technische gegevens
Verdere informatie
CORE DRILLING MACHINE - CDM 23 WP
- User friendly – 3 speed gear box allows optimal rotational speed depending on the core drilling diameter
- Rapid drill bit mounting with integrated spindle guard
- Emergency stop button is centrally located, right on the control display, and can be operated quickly and easily, even in the toughest situations
- To avoid risk of burns, the exhaust hose is equipped with additional protective heat insulation in the working area
- Maximum safety due to integrated centrifugal clutch (2-stroke gasoline motor) and mechanical overload clutch (3 speed gear box)
CHANNEL CORE DRILLING STAND - CDR 350
- Easy mounting of core drilling stand to exposed sewer pipe by tensioning set or ratchet
- If the sewer pipe is not completely exposed, the core drilling stand can be mounted easily and efficiently directly to the ground, using spikes
- Ergonomic and effortless core drilling by a hand crank cross which can be operated vertically or horizontally
- The feed rate is precisely controlled by a 1:1 direct ratio as well as a trapezoid spindle
- Precise guidance by galvanized steel posts and Teflon bushings
- Innovative drilling stand support bracket offers excellent stability and precise drilling between 45 and 90 degrees
- Adjustments for angle drilling can be made with the included No. 19 wrench
- Drilling stand support bracket can be mounted on right or left side, to accommodate the space requirements of any construction site
- Drilling stand support bracket also features a crane hook which facilitates lifting and lowering of the entire drilling system in and out of the construction pit
